Vehicle Messages
Messages are displayed on the DIC to notify the driver that the status of the vehicle has changed and that some action may be needed by the driver to correct the condition.
Multiple messages may appear one after another.
Some messages may not require immediate action, but you can press any of the DIC buttons on the instrument panel or the trip odometer reset stem on the instrument panel cluster to acknowledge that you received the messages and to clear them from the display.
Some messages cannot be cleared from the DIC display because they are more urgent.
These messages require action before they can be cleared.
You should take any messages that appear on the display seriously and remember that clearing the messages will only make the messages disappear, not correct the problem.
The following are the possible messages that can be displayed and some information about them.
See also:
Total Weight on the Vehicle's Tires
Be sure the vehicle's tires are inflated to the inflation pressures found on the Certification Tire label on the drivers door or see Vehicle Load Limits on page 9‑17 for more information. Make s ...
Adding Washer Fluid
Open the cap with the washer symbol on it and add washer fluid until full. See
Engine Compartment Overview on page 10‑6 for reservoir location.
Notice
○ When using concentrated washe ...
Recommended Fuel
Use regular unleaded gasoline with a posted octane rating of 87 or higher. If
the octane rating is less than 87, an audible knocking noise, commonly referred
to as spark knock, might be heard when ...