Lamp Messages
AUTOMATIC LIGHT CONTROL OFF
This message displays when the automatic headlamps are turned off.
This message clears itself after 10 seconds.
AUTOMATIC LIGHT CONTROL ON
This message displays when the automatic headlamps are turned on.
This message clears itself after 10 seconds.
TURN SIGNAL ON
This message displays and a chime sounds if a turn signal is left on for 1.2 km (0.75 mi). Move the turn signal/multifunction lever to the off position.
See also:
Recommended Transfer Case Settings
You can choose among four driving settings:
Indicator lights in the dial show which setting you are in. The indicator lights will come on briefly when you turn on the ignition and one will stay on. ...
Making a Call
Calls can be made using the following commands.
Dial or Call: The dial or call command can be used interchangeably to dial a phone number or a stored name tag.
Digit Dial: This command allows a phon ...
Leaving After Parking on a Hill
1. Apply and hold the brake pedal.
2. Start the engine.
3. Shift into a gear.
4. Release the parking brake.
5. Let up on the brake pedal.
6. Drive slowly until the trailer is clear of the chocks. ...