Battery Voltage and Charging Messages
BATTERY SAVER ACTIVE
This message displays when the system detects that the battery voltage is dropping below expected levels. The battery saver system starts reducing certain features of the vehicle that you may be able to notice. At the point that the features are disabled, this message is displayed. It means that the vehicle is trying to save the charge in the battery.
Turn off all unnecessary accessories to allow the battery to recharge.
The normal battery voltage range is 11.5 to 15.5 volts.
SERVICE BATTERY CHARGING SYSTEM
On some vehicles, this message displays if there is a problem with the battery charging system.
Under certain conditions, the charging system light may also turn on in the instrument panel cluster.
See Charging System Light on page 5‑18. Driving with this problem could drain the battery. Turn off all unnecessary accessories. Have the electrical system checked as soon as possible. See your dealer.
See also:
Cold Check Procedure
Use this procedure only as a reference to determine if the transmission has enough fluid to be operated safely until a hot check procedure can be made. The hot check procedure is the most accurate met ...
Compass Calibration Procedure
1. Before calibrating the compass, make sure the compass zone is set to the variance zone in which the vehicle is located. See “Compass Variance (Zone) Procedure” earlier in this section.
Do not ...
Running the Vehicle While Parked
It is better not to park with the engine running. But if you ever have to, here
are some things to know.
WARNING
Idling a vehicle in an enclosed area with poor ventilation is dangerous. Engine
e ...