When to Check and Change Automatic Transmission Fluid
A good time to check the automatic transmission fluid level is when the engine oil is changed.
Change the fluid and filter at the intervals listed in Maintenance Schedule on page 11‑3 and be sure to use the transmission fluid listed in Recommended Fluids and Lubricants on page 11‑12.
See also:
Going & Stopping
The biggest drawback I found with the Yukon was the powertrain. A
380-horsepower, 6.2-liter V-8 is standard in the Denali, but it was sluggish in
almost every passing situation I could simulate. T ...
How to Detect a Tamper Condition
If is pressed and the horn sounds,
an attempted break-in has occurred while the system was armed.
If the alarm has been activated, the THEFT ATTEMPTED message will appear on the
DIC. See Key and ...
After Off-Road Driving
Remove any brush or debris that has collected on the underbody or chassis, or under the hood. These accumulations can be a fire hazard.
After operation in mud or sand, have the brake linings cleaned ...