Automatic Operation

The system automatically controls the fan speed, air delivery, air conditioning, and recirculation to heat or cool the vehicle to the selected temperature.

When the AUTO indicator light is on, the system is in full automatic operation.

To place the system in automatic mode:

1. Press AUTO.

2. Set the temperature. Allow the system time to stabilize. Then adjust the temperature as needed.

To improve fuel efficiency and to cool the vehicle faster, recirculation may be automatically selected in warm weather. The recirculation light will not come on. Press the press it again to select outside air. to select recirculation; press it again to select outside air.

    See also:

    When to Check Power Steering Fluid
    It is not necessary to regularly check power steering fluid unless you suspect there is a leak in the system or you hear an unusual noise. A fluid loss in this system could indicate a problem. Have th ...

    Safety
    Standard safety features include: Side curtain airbags with rollover sensor Four-wheel-disc antilock brakes Electronic stability system with roll-mitigation technology Rear parking sensors Backu ...

    Owner Checks and Services
    At Each Fuel Stop ○ Check the engine oil level. See Engine Oil on page 10‑10. Once a Month ○ Check the tire inflation pressures. See Tire Pressure on page 10‑51. ○ In ...