Four-Wheel Drive
If the vehicle has Four-Wheel Drive, you can send the engine's driving power to all four wheels for extra traction. To get the most satisfaction out of Four-Wheel Drive, you must be familiar with its operation. Read the following before using Four-Wheel Drive. See the appropriate text for the transfer case in the vehicle.
Notice: Driving on clean, dry pavement in Four-Wheel Drive High or Four-Wheel Drive Low for an extended period of time may cause premature wear on the vehicle's powertrain. Do not drive on clean, dry pavement in Four-Wheel Drive High or Four-Wheel Drive Low for extended periods of time.
While driving on clean dry pavement and during tight turns, you may experience vibration in the steering system.
9-44 Driving and Operating If the vehicle has StabiliTrak®, shifting into Four-Wheel Drive Low will turn Traction Control and StabiliTrak off. See StabiliTrak® System on page 9‑59.
See also:
Air Vents
Use the slider switch in the center of the outlet, to change the direction of the airflow. Use the thumbwheel near the outlet to control the amount of airflow or to shut off the airflow.
Keep all out ...
Traction Control System (TCS)/StabiliTrak® Light
The StabiliTrak system or the Traction Control System (TCS) indicator/warning
light comes on briefly when the engine is started. If the light does not come on,
have the vehicle serviced by your ...
Canceling a Remote Start
To cancel a remote start:
• Aim the RKE transmitter at the vehicle and press and hold
until the parking lamps turn off.
• Turn on the hazard warning flashers.
• Turn the ignition switch on ...