Shifting Into Two-Wheel Drive High
Turn the knob to the Two-Wheel Drive High position. This can be done at any speed, except when shifting from Four-Wheel Drive Low.
See “Shifting Out of Four-Wheel Drive Low” for more information.
See also:
How to Add Coolant to the Recovery Tank
WARNING
You can be burned if you spill coolant on hot engine parts.
Coolant contains ethylene glycol and it will burn if the engine parts are hot enough. Do not spill coolant on a hot engine.
Notic ...
Retained Accessory Power (RAP)
These vehicle accessories can be used for up to 10 minutes after the engine is
turned off:
○ Audio System
○ Power Windows
○ Sunroof (if equipped)
Power to the audio system will ...
Tire and Loading Information Label
Label Example
A vehicle specific Tire and Loading Information label is attached to the center pillar (B-pillar). With the driver door open, you will find the label attached below the door lock post ...