Call Waiting

Call waiting must be supported on the cell phone and enabled by the wireless service carrier.

○ Press when another call is active. The original call is placed on hold. to answer an incoming call when another call is active. The original call is placed on hold.
○ Press call. again to return to the original call.
○ To ignore the incoming call, no action is required.
○ Press and switch to the call on hold. to disconnect the current call and switch to the call on hold.

    See also:

    Using the “Re-dial” Command
    1. Press and hold for two seconds. 2. After the tone, say “Re-dial.” Once connected, the person called will be heard through the audio speakers. ...

    Wheel Replacement
    Replace any wheel that is bent, cracked, or badly rusted or corroded. If wheel nuts keep coming loose, the wheel, wheel bolts, and wheel nuts should be replaced. If the wheel leaks air, replace it. ...

    Canceling a Remote Start
    To cancel a remote start: • Aim the RKE transmitter at the vehicle and press and hold until the parking lamps turn off. • Turn on the hazard warning flashers. • Turn the ignition switch on ...