Infotainment System Menus
Tone Settings
To access the tone settings, press the Home Page Tone button or the TONE button on the faceplate. Use the tone settings to adjust the following features:
○ Setting the tone
○ Adjusting the speakers
Setting the Tone
To adjust the tone:
○ Treble: Press + or − to change the level.
○ Middle (Midrange): Press + or − to change the level.
○ Bass: Press + or − to change the level.
Adjusting the Speakers
To adjust the speaker balance:
○ Press the left arrow on the bottom for more sound from the left speakers or the right arrow on the bottom for more sound from the right speakers. The middle position balances the sound between the left and right speakers.
To adjust the speaker fade:
○ Press the upper arrow for more sound from the front speakers and the lower arrow for more sound from the rear speakers. The middle position balances the sound between the front and rear speakers.
See also:
Using the “Digit Store” Command
If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number.
To hear all of the numbers recognized by the system, say “Verify” at any time.
1. Press a ...
Transmission Temperature
Press the trip odometer reset stem until TRANS TEMP displays. This display shows the temperature of the automatic transmission fluid in either degrees Celsius (°C) or degrees Fahrenheit (°F) . ...
Tire Chains
WARNING
Do not use tire chains. There is not enough clearance. Tire chains used on a vehicle without the proper amount of clearance can cause damage to the brakes, suspension, or other vehicle parts. ...