Shoulder Belt Height Adjuster

The vehicle has a shoulder belt height adjuster for the driver and right front passenger seating positions.

Adjust the height so the shoulder portion of the belt is on the shoulder but not falling off of it. The belt should be close to but not contacting the neck. Improper shoulder belt height adjustment could reduce the effectiveness of the safety belt in a crash. See How to Wear Safety Belts Properly on page 3‑16.

To move it down, push down on the release button (A) and move the height adjuster to the desired position. You can move the height adjuster up by pushing up on the shoulder belt guide.

To move it down, push down on the release button (A) and move the height adjuster to the desired position. You can move the height adjuster up by pushing up on the shoulder belt guide.

After the adjuster is set to the desired position, try to move it down without pushing the release button to make sure it has locked into position.

    See also:

    Ending Cruise Control
    There are three ways to end cruise control: • To disengage cruise control; step lightly on the brake pedal. • Press on the steering wheel. • To turn off the cruise control, press on the st ...

    Dolly Towing
    Front Towing (Front Wheels Off the Ground) – Two-Wheel-Drive Vehicles Notice: If a two-wheel drive vehicle is towed with the rear wheels on the ground, the transmission could be damaged. The rep ...

    DIC Buttons
    The buttons are the trip/fuel, vehicle information, customization, and set/ reset buttons. The button functions are detailed in the following pages. (Trip/Fuel): Press this button to display the o ...