Delayed Locking
When locking the doors with the power lock switch and a door or the liftgate is open, the doors will lock five seconds after the last door is closed. You will hear three chimes to signal that the delayed locking feature is in use.
Pressing the power lock switch twice or the lock button on the RKE transmitter twice will override the delayed locking feature and immediately lock all the doors.
This feature will not operate if the key is in the ignition.
This feature can be programmed by using the Driver Information Center (DIC). See “DELAY DOOR LOCK” under Vehicle Personalization (With DIC Buttons) on page 5‑46.
See also:
Using the “List” Command
1. Press and hold for two seconds.
2. Say “Directory.” 3. Say “Hands-Free Calling.” 4. Say “List.” ...
Front Axle
The front axle engages and disengages automatically when you shift the transfer case. Some delay for the axle to engage or disengage is normal. ...
Ride Control System Messages
SERVICE STABILITRAK
This message displays if there is a problem with the StabiliTrak® system. If this message appears, try to reset the system. Stop; turn off the engine for at least 15 seconds;
th ...