Easy Exit Driver Seat
This feature can move the seat rearward to allow extra room to exit the vehicle.
(Easy Exit Driver Seat):
Press to recall the easy exit seat position.
The vehicle must be in P (Park).
If the easy exit seat feature is programmed on in the vehicle personalization menu, automatic seat movement occurs when the ignition key is removed.
A single beep sounds. The driver seat moves back approximately 8 cm (3 in). To move the seat back farther, press
again until the seat is all the way back.
If something has blocked the driver seat while recalling the exit position, the recall may stop. Remove the obstruction; then press and hold the power seat control rearward for two seconds. Try recalling the exit position again. If the exit position is still not recalling, see your dealer for service.
See Vehicle Personalization (With DIC Buttons) on page 5‑52 for more information.
See also:
Power Steering Fluid (3.0L V6 Engine)
The power steering fluid reservoir is located toward the rear of the engine compartment
on the passenger side of the vehicle. See Engine Compartment Overview on page 10‑6
for reservoir loc ...
Making a Call
Calls can be made using the following commands.
Dial or Call: The dial or call command can be used interchangeably to dial a
phone number or a stored name tag.
Digit Dial: This command allows a ph ...
Lane Departure Warning (LDW)
For vehicles with this feature, read the entire section before using it.
WARNING
The LDW system does not steer the vehicle and is an aid to help the vehicle stay
in the driving lane. The LDW syste ...





