Leaving After Parking on a Hill
1. Apply and hold the brake pedal while you:
1.1. Start the engine.
1.2. Shift into a gear.
1.3. Release the parking brake.
2. Let up on the brake pedal.
3. Drive slowly until the trailer is clear of the chocks.
4. Stop and have someone pick up and store the chocks.
See also:
Cruise Control Messages
APPLY BRAKE BEFORE CRUISE
If this message displays when attempting to activate cruise control, apply the
brake pedal and try again.
CRUISE SET TO XXX
This message displays when the cruise control ...
Owner Checks and Services
At Each Fuel Stop
• Check the engine oil level.
See Engine Oil on page 10‑8.
Once a Month
• Check the tire inflation pressures. See Tire Pressure on page 10‑44.
• Inspect the ti ...
Erasing Speed Memory
The cruise control set speed is erased from memory by pressing or if the
ignition is turned off. ...