Shifting Into Park
WARNING
It can be dangerous to get out of the vehicle if the shift lever is not fully in P (Park) with the parking brake firmly set. The vehicle can roll. If you have left the engine running, the vehicle can move suddenly. You or others could be injured. To be sure the vehicle will not move, even when you are on fairly level ground, use the steps that follow. If you are pulling a trailer, see Driving Characteristics and Towing Tips on page 9‑57.
Use this procedure to shift into P (Park):
1. Hold the brake pedal down and set the parking brake.
See Parking Brake on page 9‑33 for more information.
2. Hold the button on the shift lever and push the lever toward the front of the vehicle into P (Park).
3. Turn the ignition to LOCK/OFF.
4. Remove the key.
See also:
Bluetooth Controls
Use the buttons located on the steering wheel to operate the in-vehicle Bluetooth system.
See Steering Wheel Controls on page 5‑2 for more information.
(Push To Talk): Press to answer incomin ...
Erasing Universal Home Remote Buttons
The programmed buttons should be erased when the vehicle is sold or the lease ends.
To erase either Rolling Code or Fixed Code settings on the Universal Home Remote device:
1. Press and hold the two ...
Stopping and Resuming Playback
To stop playing a DVD without turning off the system, press the button on the remote control, or press the softkey located under the or the
tabs displayed on the radio. If the radio is sourced to ...