Pairing
A Bluetooth&-enabled cell phone must be paired to the Bluetooth system and then connected to the vehicle before it can be used. See your cell phone manufacturer's user guide for Bluetooth functions before pairing the cell phone. If a Bluetooth phone is not connected, calls will be made using OnStar Hands&-Free Calling, if available. See OnStar Overview on page 14‑1 for more information.
Pairing Information
○ A Bluetooth phone with MP3 capability cannot be paired to the vehicle as a
phone and an MP3 player at the same time.
○ Up to five cell phones can be paired to the Bluetooth system.
○ The pairing process is disabled when the vehicle is moving.
○ Pairing only needs to be completed once, unless the pairing information on the
cell phone changes or the cell phone is deleted from the system.
○ Only one paired cell phone can be connected to the Bluetooth system at a time.
○ If multiple paired cell phones are within range of the system, the system connects
to the first available paired cell phone in the order that they were first paired
to the system. To link to a different paired phone, see “Linking to a Different
Phone” later in this section.
Pairing a Phone
1. Press
. The system responds “Ready,”
followed by a tone.
2. Say “Bluetooth.” This command can be skipped.
3. Say “Pair.” The system responds with instructions and a four&-digit Personal Identification Number (PIN). The PIN is used in Step 5.
4. Start the pairing process on the cell phone that you want to pair. For help with this process, see your cell phone manufacturer's user guide.
5. Locate the device named “Your Vehicle” in the list on the cell phone. Follow the instructions on the cell phone to enter the PIN provided in Step 3. After the PIN is successfully entered, the system prompts you to provide a name for the paired cell phone. This name will be used to indicate which phones are paired and connected to the vehicle. The system responds with “<Phone name> has been successfully paired” after the pairing process is complete.
6. Repeat Steps 1 through 5 to pair additional phones.
Listing All Paired and Connected Phones
The system can list all cell phones paired to it. If a paired cell phone is also connected to the vehicle, the system responds with “is connected” after that phone name.
1. Press
. The system responds “Ready,”
followed by a tone.
2. Say “Bluetooth.”
3. Say “List.”
Deleting a Paired Phone
If the phone name you want to delete is unknown, see “Listing All Paired and Connected Phones.”
1. Press
. The system responds “Ready,”
followed by a tone.
2. Say “Bluetooth.”
3. Say “Delete.” The system asks for which phone to delete.
4. Say the name of the phone you want to delete.
Connecting to a Different Phone
To connect to a different cell phone, the Bluetooth system looks for the next available cell phone in the order in which all available cell phones were paired. Depending on which cell phone you want to connect to, you may have to use this command several times.
1. Press
. The system responds “Ready,”
followed by a tone.
2. Say “Bluetooth.”
3. Say “Change phone.”
○ If another cell phone is found, the response will be “<Phone name> is now connected.”
○ If another cell phone is not found, the original phone remains connected.
See also:
Tire Rotation
Tires should be rotated every 12 000 km (7,500 mi). See Maintenance Schedule on page 11‑3.
Tires are rotated to achieve a uniform wear for all tires. The first rotation is the most important.
...
Storing Memory Positions
To save into memory:
1. Adjust the driver seat, seatback recliner, both outside mirrors, and the throttle and brake pedals, if equipped.
See Power Mirrors on page 2‑15 and Adjustable Throttle ...
Turning the System On and Off
The system can be disabled through the Driver Information Center (DIC).
See “Park Assist” under Vehicle Personalization (With DIC Buttons) on page 5‑46 for more information.
URPA defaults ...





