Storing Memory Positions

To save into memory:

1. Adjust the driver seat, seatback recliner, both outside mirrors, and the throttle and brake pedals, if equipped.

See Power Mirrors on page 2‑15 and Adjustable Throttle and Brake Pedal on page 9‑27 for more information.

Not all mirrors and adjustable throttle and brake pedals will have the ability to save and recall their positions.

2. Press and hold “1” until two beeps sound.

3. Repeat for a second driver position using “2.” To recall, press and release “1” or “2.” The vehicle must be in P (Park).

A single beep will sound. The seat, outside mirrors, and adjustable throttle and brake pedals will move to the position previously stored for the identified driver.

    See also:

    How to Detect a Tamper Condition
    If is pressed and the horn sounds, an attempted break-in has occurred while the system was armed. If the alarm has been activated, the THEFT ATTEMPTED message will appear on the DIC. See Key and ...

    Steering Wheel Adjustment
    The tilt lever is located on the lower left side of the steering column. To adjust the steering wheel: 1. Hold the steering wheel and pull the lever. 2. Move the steering wheel up or down. 3. Re ...

    Sensors
    The solar sensor, located on top of the instrument panel near the windshield, monitors the solar heat. The climate control system uses the information to adjust the temperature, fan speed, recircu ...