Playing the Radio

For vehicles equipped with the MyLink or IntelliLink infotainment system, see the separate MyLink/ IntelliLink Features and Functions Guide for more information.

Audio Source

VOL/ 1. Press to turn the radio on or off. (Power/Volume):

1. Press to turn the radio on or off.

2. Turn to increase or decrease the volume of the active source (i.e., current audio source, active navigation voice guidance, or traffic prompts).

The steering wheel controls can also be used to adjust the volume. See “Steering Wheel Controls” in the vehicle owner manual for more information.

To access the radio main page, press the SOURCE button on the faceplate, the Now Playing screen button, or one of the audio screen buttons on the Home Page.

While on the audio main page, press the Source button repeatedly to display and cycle through the available sources (AM, FM, and XM (if equipped), CD, USB/iPod, and AUX).

    See also:

    Rear Towing (Rear Wheels Off the Ground)
    Two-Wheel-Drive Vehicles Use the following procedure to dolly tow a two-wheel-drive vehicle from the rear: 1. Attach the dolly to the tow vehicle following the dolly manufacturer's instructions. ...

    Storing the Flat Tire
    1. Remove the cable package from the jack storage area. 2. Remove the small center cap by tapping the back of the cap with the extension of the shaft, if the vehicle has aluminum wheels. 3. Put the ...

    Dual Tone Multi-Frequency (DTMF) Tones
    The Bluetooth system can send numbers and the numbers stored as name tags during a call. You can use this feature when calling a menu&-driven phone system. Account numbers can also be stored f ...