Turning the Rear Vision Camera System Off or On

To turn off the rear vision camera system, press and hold The rear vision camera display is now disabled., located on the inside rearview mirror, until the left indicator light turns off.

The rear vision camera display is now disabled.

To turn the rear vision camera system on again, press and hold light illuminates. The rear vision camera system display is now enabled and the display will appear in the mirror normally. until the left indicator light illuminates. The rear vision camera system display is now enabled and the display will appear in the mirror normally.

    See also:

    When the Light Is On Steady
    This indicates that one or more of the tires are significantly underinflated. A Driver Information Center (DIC) tire pressure message may also display. See Vehicle Messages on page 5‑42 for mor ...

    How the System Works
    URPA comes on automatically when the shift lever is moved into R (Reverse). A single tone sounds to indicate the system is working. URPA operates only at speeds less than 8 km/h (5 mph). An obstacle ...

    Manual Transfer Case
    The transfer case shift lever is on the floor to the right of the driver. Use this lever to shift into and out of Four-Wheel Drive. A Four-Wheel Drive indicator light comes on when you shift int ...