Overview

For vehicles equipped with the MyLink® or IntelliLink® infotainment system, see the separate MyLink/ IntelliLink Features and Functions Guide for more information. Keeping your eyes on the road and your mind on the drive is important for safe driving. The infotainment system has built-in features intended to help with this by disabling some features when driving. A grayed-out function is not available when the vehicle is moving.

All functions are available when the vehicle is parked. Do the following before driving:

○ Become familiar with the infotainment system operation, buttons on the faceplate, and touch-sensitive screen buttons.

○ Set up the audio by presetting favorite stations, setting the tone, and adjusting the speakers.

○ Set up phone numbers in advance so they can be called easily by pressing a single button or a single voice command for vehicles equipped with phone capability.

WARNING

Taking your eyes off the road too long or too often while using the navigation system could cause a crash and you or others could be injured or killed. Focus your attention on driving and limit glances at the moving map on the navigation screen. Use voice guidance whenever possible.

See also:

Fuses and Circuit Breakers
If the vehicle is a hybrid, see the hybrid supplement for more information. The wiring circuits in the vehicle are protected from short circuits by a combination of fuses, circuit breakers and fusibl ...

Shifting into Neutral
To shift the transfer case to N (Neutral) do the following: 1. Make sure the vehicle is parked so that it will not roll. 2. Set the parking brake and press and hold the regular brake pedal. See Park ...

Instrument Panel Fuse Block
The instrument panel fuse block is located on the passenger side panel of the center console. To access the fuses, open the fuse panel door from the passenger side by pulling it out. To reinsta ...