Adjustable Throttle and Brake Pedal

On vehicles with this feature, you can change the position of the throttle and brake pedals.

No adjustment to the pedals can be made when the vehicle is in R (Reverse) or while using cruise control.

The control used to adjust the pedals is located on the instrument panel below the climate control system.

The control used to adjust the pedals is located on the instrument panel below the climate control system.

Press the bottom of the control to move the pedals closer. Press the top of the control to move the pedals away.

Before you start driving, fully press the brake pedal to confirm the adjustment is right for you. While driving, make only small adjustments.

The vehicle may have a memory function which lets pedal settings be saved and recalled. See Memory Seats on page 3‑7.

    See also:

    How the System Works
    URPA comes on automatically when the shift lever is moved into R (Reverse). A single tone sounds to indicate the system is working. URPA operates only at speeds less than 8 km/h (5 mph). An obstacle ...

    Shifting from Two-Wheel Drive High to Four-Wheel Drive High
    • Shifts between Two-Wheel Drive High and Four-Wheel Drive High can be made at any vehicle speed. • Shift the transfer case lever in one continuous motion into either the Four-Wheel Drive High or ...

    Lower Anchor and Top Tether Anchor Locations
    Regular Cab — Two-Passenger Front Seat Regular Cab — Three-Passenger Front Seat (Top Tether Anchor): Seating positions with top tether anchors. Do not install a child restraint in the ce ...