MP3 Radio with a Six-Disc CD Player

GMC Sierra / GMC Sierra Owners Manuals / Instruments and Controls / Controls / Clock / MP3 Radio with a Six-Disc CD Player

To set the time and date:

1. Turn the ignition key to ACC/ ACCESSORY or ON/RUN, then press the 2. Press the MENU button and then the softkey under the tab to display HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year). button to turn the radio on.

2. Press the MENU button and then the softkey under the 3. Press the softkey located under any one of the tabs to change that setting. tab to display HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year).

3. Press the softkey located under any one of the tabs to change that setting.

4. To increase the time or date, do one of the following:

• Press the softkey below the selected tab.

• Press the • Press the SEEK button.

• Press the FWD button. FWD button.

• Turn the 5. To decrease the time or date, do one of the following: knob clockwise.

5. To decrease the time or date, do one of the following:

• Press the • Press the SEEK button.

• Press the REV button. REV button.

• Turn the To change the time default setting from 12 hour to 24 hour or to change the date default setting from month/ day to day/month: knob counterclockwise.

To change the time default setting from 12 hour to 24 hour or to change the date default setting from month/ day to day/month:

1. Press the MENU button and then the softkey under the 2. Press the softkey located below the forward arrow tab. 12H, 24H, the date MM/DD (month and day), and DD/MM (day and month) displays. tab.

2. Press the softkey located below the forward arrow tab. 12H, 24H, the date MM/DD (month and day), and DD/MM (day and month) displays.

3. Press the softkey located below the desired option.

4. Press the MENU button again to apply the desired option, or let the screen time out.

    See also:

    Safety Chains
    Always attach chains between the vehicle and the trailer. Cross the safety chains under the tongue of the trailer to help prevent the tongue from contacting the road if it becomes separated from the h ...

    Entering the Feature Settings Menu
    1. Turn the ignition on and place the vehicle in P (Park). To avoid excessive drain on the battery, it is recommended that the headlamps are turned off. 2. Press the customization button to enter th ...

    Removing and Replacing the Floor Mat
    The driver side floor mat is held in place by two retainers. 1. Pull up on the rear of the floor mat to unlock each retainer and remove. 2. Reinstall by lining up the floor mat retainer openings o ...