See also:

Stop/Tail/Turn Signal/ Sidemarker Lamp
To replace one of these lamps: 1. Open the liftgate. See Liftgate on page 2‑9. 2. Remove the two screw covers from the taillamp assembly. 3. Remove the two screws securing the taillamp asse ...

Turning the System On and Off
The system can be disabled through the Driver Information Center (DIC). See “Park Assist” under Vehicle Personalization (With DIC Buttons) on page 5‑46 for more information. URPA defaults ...

Hood
To open the hood, do the following: 1. Pull the hood release handle with this symbol on it. It is located under the instrument panel on the driver's side of the vehicle. 2. At the front of the veh ...