Returning the Seat to the Seating Position

To return the second row seat to its normal seating position:

1. Remove objects on the floor behind the second row seat or in the seat tracks on the floor.

2. Pull the seatback rearward until it is locked in place.

3. Slide the seat rearward by pushing on the seatback until it is locked into place.

4. Return the head restraint to the upright position by reaching behind the seat and pulling the head restraint forward until it locks into place.

Push and pull on the head restraint to make sure that it is locked.

5. Push down on the rear of the seat cushion until it is locked in place.

6. Push and pull on the seatback and seat cushion to make sure they are locked in place.

7. Check that the safety belt is not under the seat cushion.

    See also:

    Collision Parts
    Genuine GM Collision parts are new parts made with the same materials and construction methods as the parts with which the vehicle was originally built. Genuine GM Collision parts are the best choice ...

    Manual Trailer Brake Apply
    The Manual Trailer Brake Apply Lever is located on the Trailer Brake Control Panel and is used to apply the trailer’s electric brakes independent of the vehicle’s brakes. This lever is used in th ...

    Bulb Replacement
    For the proper type of replacement bulbs, see Replacement Bulbs on page 10‑45. For any bulb-changing procedure not listed in this section, contact your dealer. ...