Manual Liftgate

To unlock the liftgate, press the power door lock switch or press See Remote Keyless Entry (RKE) System Operation on page 2‑3. on the Remote Keyless Entry (RKE) transmitter twice.

See Remote Keyless Entry (RKE) System Operation on page 2‑3.

To open the liftgate, press the touch pad under the liftgate handle and lift up. The vehicle must be in P (Park) and the battery must be charged.

Use the pull handle to lower and close the liftgate.

Always close the liftgate before driving.

    See also:

    Checking Engine Oil
    It is a good idea to check the engine oil level at each fuel fill. In order to get an accurate reading, the vehicle must be on level ground. The engine oil dipstick handle is a yellow loop. See Engi ...

    Safety Belt Care
    Keep belts clean and dry. WARNING Do not bleach or dye safety belts. It may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with m ...

    Using the “Digit Store” Command
    If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number. To hear all of the numbers recognized by the system, say “Verify” at any time. 1. Press a ...