See also:

Compass Calibration Procedure
1. Before calibrating the compass, make sure the compass zone is set to the variance zone in which the vehicle is located. See “Compass Variance (Zone) Procedure” earlier in this section. Do not ...

Lower Anchors
Lower Anchors Lower anchors (A) are metal bars built into the vehicle. There are two lower anchors for each LATCH seating position that will accommodate a child restraint with lower attachments (B) ...

Voltmeter Gauge
This gauge indicates the battery voltage when the ignition is turned on. When the ignition is on, this gauge indicates the battery voltage. When the engine is running, this gauge shows the conditi ...