Storing Memory Positions
To save into memory:
1. Adjust the driver seat, seatback recliner, and both outside mirrors.
See Power Mirrors on page 2‑16 for more information.
Not all vehicles will have the ability to save and recall the mirror positions.
2. Press and hold “1” until two beeps sound.
3. Repeat for a second driver position using “2.”
To recall, press and release “1” or “2.” The vehicle must be in P (Park). A single beep will sound.
The seat and outside mirrors will move to the position previously stored for the identified driver.
See Memory Seats on page 3‑7 and Vehicle Personalization (With DIC Buttons) on page 5‑46 for more information.
See also:
Taillamps (Chassis Cab Models)
A. Backup Lamp
B. Stoplamp/Taillamp/Turn Signal Lamp
To replace one of these bulbs:
1. Remove the four screws.
2. Lift the lens off the lamp assembly.
3. Turn the old bulb counterclockwise and ...
Ride Control System Messages
ALL WHEEL DRIVE OFF
If your vehicle has the All-Wheel Drive (AWD) system, this message displays when
the rear drive system is overheating. This message turns off when the rear drive
system cools ...
Footnotes — Maintenance Schedule Additional Required Services — Severe
a) Or every two years, whichever comes first.
b) Check all fuel and vapor lines and hoses for proper hook-up, routing, and condition. Check that the purge valve, if the vehicle has one, works properl ...