Storing a Flat or Spare Tire and Tools

WARNING

Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place.

To store the flat tire:

1. Remove the cable package. The cable is stored in a plastic bag under the compact

1. Remove the cable package. The cable is stored in a plastic bag under the compact spare tire.

2. Remove the small center cap by tapping the back of the cap with the extension of the shaft, if the vehicle has aluminum wheels.

3. Put the flat tire in the rear storage area with the valve stem pointing toward the rear of the vehicle.

A. Cable

A. Cable
B. Liftgate Hinges
C. Center of the Wheel
D. Door Striker

4. Pull the cable (A) through the door striker (D) then the center of the wheel (C).

5. Hook the cable onto the outside portion of the liftgate hinges (B).

5. Hook the cable onto the outside portion of the liftgate hinges (B).
6. Hook the other end of the cable onto the outside portion of the liftgate hinge on the other side of the vehicle.
7. Pull on the cable to make sure it is secure.

8. Make sure the metal tube is centered at the striker. Push the tube toward

8. Make sure the metal tube is centered at the striker. Push the tube toward the front of the vehicle.

9. Close the liftgate and make sure it is latched properly.

The compact spare is for temporary use only. Replace the compact spare tire with a full-size tire as soon as you can.

    See also:

    Driver Information Center (DIC)
    The DIC display is located at the bottom of the instrument panel cluster. It shows the status of many vehicle systems and enables access to the personalization menu. The DIC buttons are located on ...

    Event Data Recorders
    This vehicle has an Event Data Recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an airbag deployment or hitting a road obstacle, data th ...

    Airbag Readiness Light
    This light shows if there is an electrical problem. The system check includes the airbag sensor(s), passenger sensing system, the pretensioners, the airbag modules, the wiring, and the crash sensing a ...