See also:

Stop/Tail/Turn Signal/ Sidemarker Lamp
To replace one of these lamps: 1. Open the liftgate. See Liftgate on page 2‑9. 2. Remove the two screw covers from the taillamp assembly. 3. Remove the two screws securing the taillamp asse ...

Interior Glass
To clean, use a terry cloth fabric dampened with water. Wipe droplets left behind with a clean dry cloth. Commercial glass cleaners may be used, if necessary, after cleaning the interior glass with p ...

How to Check Lubricant
To get an accurate reading, the vehicle should be on a level surface. If the level is below the bottom of the fill plug hole, located on the transfer case, the vehicle will need some lubricant ad ...