Removing the Spare Tire and Tools

To access the spare tire and tools:

1. Open the liftgate. See Liftgate on page 2‑9.
2. Lift the load floor up.

Coin/Pierce Jack with One-Piece Wrench

Coin/Pierce Jack with One-Piece Wrench

A. Extension
B. Wheel Wrench
C. Jack

Hex-Head Jack with Three-Piece Wrench

Hex-Head Jack with Three-Piece Wrench

A. Wheel Wrench
B. Jack

3. If you have a coin/pierce jack and one-piece wrench, remove the extension (A), wheel wrench (B) and jack (C).

If you have a hex-head jack and three-piece wrench, remove the wheel wrench (A) and jack (B).

Place the tools next to the tire being changed.

4. Turn the retainer nut counterclockwise and remove the spare tire.

4. Turn the retainer nut counterclockwise and remove the spare tire.
5. Place the spare tire next to the tire being changed.

    See also:

    Uniform Tire Quality Grading
    Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: ...

    Theft-Deterrent Feature
    TheftLock® is designed to discourage theft of the vehicle's radio by learning a portion of the Vehicle Identification Number (VIN). The radio does not operate if it is stolen or moved to a different ...

    Safety
    The National Highway Traffic Safety Administration gave the 2007 Yukon a five-star frontal crash-test rating; it hasn't done a side-impact test as of this writing. Rollover ratings were listed at ...