Fog Lamps
To replace one of these bulbs:
1. Locate the fog lamp assembly under the front facia.
2. Disconnect the bulb socket from the electrical connector, turn, and pull out the bulb assembly.
3. Remove the old bulb from the bulb socket and push the new bulb straight into the bulb socket until it connects.
4. Push the bulb socket into the fog lamp assembly and turn clockwise to lock it into place.
5. Reconnect the bulb socket to the electrical connector.
See also:
How to Check Power Steering Fluid
Notice: Extremely small amounts of contamination can cause steering system damage
and cause it to not work properly. Do not allow contaminants to contact the fluid
side of the reservoir cap/ dipst ...
Rear Seats
The vehicle's rear seat has head restraints in the outboard seating positions
that cannot be adjusted. Rear outboard head restraints are not designed to be removed. ...
Electronic Transfer Case
The transfer case knob is located next to the steering column.
Use the dial to shift into and out of four-wheel drive. ...