Starter Switch Check
WARNING
When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured.
1. Before starting this check, be sure there is enough room around the vehicle.
2. Firmly apply both the parking brake and the regular brake. See Parking Brake
on page 9‑33.> Do not use the accelerator pedal, and be ready to turn off the engine
immediately if it starts.> 3. Try to start the engine in each gear. The vehicle
should start only in P (Park) or N (Neutral). If the vehicle starts in any other
position, contact your dealer for service.
See also:
Tire Chains
WARNING Do not use tire chains. There is not enough clearance. Tire chains used
on a vehicle without the proper amount of clearance can cause damage to the brakes,
suspension or other vehicle part ...
Pick-Up Box Identification and Fender Marker Lamps
The pick-up box identification lamps are LEDs. For replacement of the LED lighting assembly contact your dealer.
To replace a pickup box fender marker lamp bulb:
1. Press the tab from the back to re ...
TTY Users
OnStar has the ability to communicate to the deaf, hard&-ofhearing, or speech&-impaired
customers while in the vehicle. The available dealer&-installed TTY system can provide
in-vehicl ...