How to Check Lubricant

To get an accurate reading, the vehicle should be on a level surface.

To get an accurate reading, the vehicle should be on a level surface.

If the level is below the bottom of the fill plug hole, located on the transfer case, the vehicle will need some lubricant added. Add enough lubricant to raise the level to the bottom of the fill plug hole. A fluid loss could indicate a problem; check and have it repaired, if needed.

What to Use

Refer to Recommended Fluids and Lubricants on page 11‑12 to determine what kind of lubricant to use.

    See also:

    Setting Cruise Control
    If the cruise button is on when not in use, it could get bumped and go into cruise when not desired. Keep the cruise control switch off when cruise is not being used. The cruise control light on the ...

    Acadia in the Market
    The three-row crossover segment is getting increasingly crowded these days, as car shoppers shift from minivans and truck-based SUVs to car-based vehicles like the Acadia. It has a number of compe ...

    Starter Switch Check
    WARNING When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room aroun ...