When the System Does Not Seem To Work Properly
The RVC system may not work properly or display a clear image if:
○ The RVC is turned off. See “Turning the Rear Vision Camera System On or Off” earlier in this section.
○ It is dark.
○ The sun or the beam of headlights is shining directly into the camera lens.
○ Ice, snow, mud, or anything else builds up on the camera lens. Clean the lens, rinse it with water, and wipe it with a soft cloth.
○ The back of the vehicle is in an accident, the position and mounting angle of the camera can change or the camera can be affected. Be sure to have the camera and its position and mounting angle checked at your dealer.
See also:
Removing the Flat Tire and Installing the Spare Tire
1. Do a safety check before proceeding. See If a Tire Goes Flat on page 10‑58 for more information.
2. If the vehicle has a wheel cover, loosen the plastic nut caps with the wheel wrench. They ...
Glove Box
Lift up on the glove box lever to open it. ...
Front Axle
The front axle engages and disengages automatically when you shift the transfer case. Some delay for the axle to engage or disengage is normal. ...