Safety Belts
This section of the manual describes how to use safety belts properly. It also describes some things not to do with safety belts.
WARNING
Do not let anyone ride where a safety belt cannot be worn properly. In a crash, if you or your passenger(s) are not wearing safety belts, injuries can be much worse than if you are wearing safety belts. You can be seriously injured or killed by hitting things inside the vehicle harder or by being ejected from the vehicle. In addition, anyone who is not buckled up can strike other passengers in the vehicle.
It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, passengers riding in these areas are more likely to be seriously injured or killed. Do not allow passengers to ride in any area of the vehicle that is not equipped with seats and safety belts. Always wear a safety belt, and check that all passenger(s) are restrained properly too.
This vehicle has indicators as a reminder to buckle the safety belts. See Safety Belt Reminders on page 5‑11 for additional information.
See also:
Ignition Positions
The ignition switch has four different positions.
Notice: Using a tool to force the key to turn in the ignition could cause damage
to the switch or break the key. Use the correct key, make sure i ...
Hitches
Use the correct hitch equipment. See your dealer or a hitch dealer for assistance.
○ The rear bumper on the vehicle is not intended for hitches. Do not attach rental
hitches or other bumper-t ...
Compass Calibration Procedure
1. Before calibrating the compass, make sure the compass zone is set to the variance zone in which the vehicle is located.
See “Compass Variance (Zone) Procedure” earlier in this section.
Do not ...





