How to Detect a Tamper Condition

If an attempted break-in has occurred while the system was armed. is pressed and the horn sounds, an attempted break-in has occurred while the system was armed.

If the alarm has been activated, the THEFT ATTEMPTED message will appear on the DIC. See Key and Lock Messages on page 5.29 for additional information.

    See also:

    Range Selection Mode
    Range Selection Mode The Range Selection Mode switch, if equipped, is located on the shift lever. To enable the Range Selection feature: 1. Move the column shift lever to the M(Manual) position ...

    Adding Equipment to the Airbag-Equipped Vehicle
    Adding accessories that change the vehicle's frame, bumper system, height, front end, or side sheet metal may keep the airbag system from working properly. The operation of the airbag system can also ...

    Starting Procedure
    1. With your foot off the accelerator pedal, turn the ignition key to START. When the engine starts, let go of the key. The idle speed will go down as your engine gets warm. Do not race the engine imm ...