See also:

Using the “Digit Dial” Command
The digit dial command allows a phone number to be dialed by entering the digits one at a time. After each digit is entered, the system repeats back the digit it heard followed by a tone. If an unwa ...

Center High-Mounted Stoplamp (CHMSL) and Cargo Lamp
To replace one of these bulbs: 1. Remove the two screws and lift off the lamp assembly. A. Cargo Lamp B. Center High-Mounted Stoplamp (CHMSL) Bulb 2. On the reverse side of the lamp assembly, r ...

Flash-to-Pass
The flash&-to&-pass feature works with the low beams or Daytime Running Lamps (DRL) on or off. To flash the high beams, pull the turn signal/lane change lever all the way toward you, then ...