Lamps
Properly working headlamps, taillamps, and brake lamps are important to see and be seen on the road.
• Signs that the headlamps need attention include dimming, failure to light, cracking, or damage.
The brake lamps need to be checked periodically to ensure that they light when braking.
• With a multi-point inspection, your dealer can check the lamps and note any concerns.
See also:
Compass Calibration Procedure
1. Before calibrating the compass, make sure the compass zone is set to the variance zone in which the vehicle is located.
See “Compass Variance (Zone) Procedure” earlier in this section.
Do not ...
Steps for Determining Correct Load Limit
1. Locate the statement “The combined weight of occupants and cargo should never
exceed XXX kg or XXX lbs” on your vehicle's placard.
2. Determine the combined weight of the driver and pass ...
Shifting into Neutral
To shift the transfer case to N (Neutral) do the following:
1. Make sure the vehicle is parked so that it will not roll.
2. Set the parking brake and apply the regular brake pedal. See Parking Brake ...