Starter Switch Check

WARNING
When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured.

1. Before starting this check, be sure there is enough room around the vehicle.

2. Firmly apply both the parking brake and the regular brake.

See Parking Brake on page 9‑28.

Do not use the accelerator pedal, and be ready to turn off the engine immediately if it starts.

3. Try to start the engine in each gear. The vehicle should start only in P (Park) or N (Neutral).

If the vehicle starts in any other position, contact your dealer for service.

    See also:

    Turning the System On and Off
    The system can be disabled through the Driver Information Center (DIC). See “Park Assist” under Vehicle Personalization (With DIC Buttons) on page 5‑46 for more information. URPA defaults ...

    Power Liftgate
    On vehicles with a power liftgate, the vehicle must be in P (Park) to operate. The taillamps flash when the power liftgate moves. WARNING You or others could be injured if caught in the path of th ...

    When the System Does Not Seem To Work Properly
    The RVC system might not work properly or display a clear image if: • The RVC is turned off. See “Turning the RVC System On or Off” earlier in this section. • It is dark. • The sun or the ...