Ignition Transmission Lock Check

While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position.

• The ignition should turn to LOCK/OFF only when the shift lever is in P (Park).
• The ignition key should come out only in LOCK/OFF.

Contact your dealer if service is required.

    See also:

    What to Use
    Read the manufacturer's instructions before refilling the windshield washer fluid. If operating the vehicle in an area where the temperature may fall below freezing, use a fluid that has suffi ...

    When the System Does Not Seem to Work Properly
    The following messages may be displayed on the DIC: SERVICE PARKING ASSIST: If this message occurs, take the vehicle to your dealer to repair the system. PARK ASSIST OFF: If the URPA system does n ...

    Power Liftgate 3/4 Mode
    To program the liftgate opening height: 1. Turn the liftgate switch to either the MAX , or the 3/4 mode position and power open the liftgate. 2. Stop the liftgate movement at the desired height by ...