Replacing Brake System Parts
The braking system on a vehicle is complex. Its many parts have to be of top quality and work well together if the vehicle is to have really good braking. The vehicle was designed and tested with top-quality brake parts. When parts of the braking system are replaced, be sure to get new, approved replacement parts.
If this is not done, the brakes might not work properly. For example, installing disc brake pads that are wrong for the vehicle, can change the balance between the front and rear brakes — for the worse. The braking performance expected can change in many other ways if the wrong replacement brake parts are installed.
See also:
Special Application Services
○ Severe Commercial Use Vehicles Only: Lubricate chassis components every 5 000
km/ 3,000 mi.
○ Have underbody flushing service performed once a year. ...
Navigation System
If the vehicle has a navigation system, use of the system may result in the storage of destinations, addresses, telephone numbers, and other trip information.
Refer to the navigation manual for infor ...
Steps for Determining Correct Load Limit
1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle's placard.
2. Determine the combined weight of the driver and passengers ...