Viscosity Grade
SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50.
If in an area of extreme cold, where the temperature falls below −20°F (−29°C), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, always select an oil that meets the dexos1 specification or equivalent. See “Specification” for more information.
See also:
Muting a Call
During a call, all sounds from inside the vehicle can be muted so that the person on the other end of the call cannot hear them.
• To mute a call, press , and then say “Mute call.” . To cancel ...
When the System Does Not Seem To Work Properly
The RVC system may not work properly or display a clear image if:
○ The RVC is turned off. See “Turning the Rear Vision Camera System On or Off”
earlier in this section.
○ It is da ...
Power Reclining Seatbacks
To adjust a power seatback, if available:
○ Tilt the top of the control rearward to recline.
○ Tilt the top of the control forward to raise. ...