Safety Belts
Safety Belts
Refer to the following sections for important information on how to use safety belts properly.
• Safety Belts on page 3‑12.
• How to Wear Safety Belts Properly on page 3‑13.
• Lap-Shoulder Belt on page 3‑15.
• Lower Anchors and Tethers for Children (LATCH System) on page 3‑51.
See also:
Stop/Tail/Turn Signal/ Sidemarker Lamp
To replace one of these lamps:
1. Open the liftgate. See Liftgate on page 2‑9.
2. Remove the two screw covers from the taillamp assembly.
3. Remove the two screws securing the taillamp asse ...
Adding Equipment to the Airbag-Equipped Vehicle
Q: Is there anything I might add to or change about the vehicle that could keep the airbags from working properly?
A: Yes. If you add things that change your vehicle's frame, bumper system, height, f ...
Compass Calibration Procedure
1. Before calibrating the compass, make sure the compass zone is set to the variance zone in which the vehicle is located.
See “Compass Variance (Zone) Procedure” earlier in this section.
Do not ...