Hood
To open the hood:
1. Pull the handle with this symbol on it. It is located inside the vehicle to the left of the brake pedal.
2. Go to the front of the vehicle and locate the secondary hood release. This is located under the hood, near the center of the grille.
3. Push the secondary hood release to the right.
4. Lift the hood.
Before closing the hood, be sure all the filler caps are on properly.
Then bring the hood from full open to within 152mm (6 in) from the closed position, pause, and push the front center of the hood with a swift, firm motion to fully close the hood.
See also:
What Makes an Airbag Inflate?
In a deployment event, the sensing system sends an electrical signal triggering
a release of gas from the inflator. Gas from the inflator fills the airbag causing
the bag to break out of the cover ...
Manual Seats
To adjust the seat:
1. Lift the bar to unlock the seat.
2. Slide the seat to the desired position and release the bar.
3. Try to move the seat back and forth to be sure the seat is locked in pl ...
Control of a Vehicle
Braking, steering, and accelerating are important factors in helping to control a vehicle while driving. ...