Guidelines
The RVC system has a guideline overlay that can help the driver align the vehicle when backing into a parking spot.
If the vehicle has dual rear wheels, this feature will not be available.
To turn the guidelines on or off:
1. Make sure that URPA has not been disabled.
2. Shift into P (Park).
3. Press MENU to enter the configure menu options. Turn the Multifunction knob until the Display feature is highlighted and press the Multifunction knob. Or press the Display screen button 4. Select the Rear Camera Options screen button. The Rear Camera Options screen displays.
5. Touch the Guidelines screen button. The screen button will be highlighted when on.
See also:
What to Add
Use only new DOT 3 brake fluid from a sealed container. See Recommended Fluids and Lubricants on page 11‑12.
Always clean the brake fluid reservoir cap and the area around the cap before removi ...
Language
This display allows you to select the language in which the DIC messages will appear. To select a language:
1. Press the trip odometer reset stem until ODOMETER displays.
2. While in the ODOMETER di ...
Under the Hood
The Yukon Hybrid uses a two-mode hybrid system. The system augments the SUV's
V-8 engine with two electric motors, both powered by a 300-volt battery pack. A
cylinder-deactivation system cuts powe ...