Easy Exit Driver Seat
This feature moves the seat rearward allowing the driver more room to exit the vehicle.
To activate, turn the ignition off and open the driver door. If the driver door is already open, turning the ignition off will activate the easy exit driver seat.
This feature can be turned on or off using the vehicle personalization menu. See Vehicle Personalization on page 5‑33 for more information. To stop recall movement, press one of the memory or power seat controls.
If something has blocked the driver seat while recalling the exit position, the recall may stop. Remove the obstruction; then press and hold the power seat control rearward for two seconds. Try recalling the exit position again. If the exit position is still not recalling, see your dealer for service.
See also:
Driver Information Center (DIC) (With DIC Buttons)
If your vehicle has DIC buttons, the information below explains the operation of this system.
The DIC displays information about your vehicle. It also displays warning messages if a system problem is ...
Doing Your Own Service Work
If the vehicle is a hybrid, see the hybrid supplement for more information.
WARNING
You can be injured and the vehicle could be damaged if you try to do service work on a vehicle without knowing eno ...
Making a Call
Calls can be made using the following commands.
Dial or Call: The dial or call command can be used interchangeably to dial a
phone number or a stored name tag.
Digit Dial: This command allows a ph ...