When Using the Manual Transfer Case

• Shifts into or out of Four-Wheel Drive Low or N (Neutral) should be made using quick motions to avoid excessive gear grinding.

Shifting slowly may make it more difficult to shift.

• You may notice that it is harder to shift when the vehicle is cold.

After the vehicle warms up the shifting will return to normal.

• While in Four-Wheel High or Four-Wheel Drive Low you may experience reduced fuel economy.

• Avoid driving in Four-Wheel Drive on clean, dry pavement.

It may cause your tires to wear faster, make the transfer case harder to shift, and run noisier.

• If the transfer case shifter is in the N (Neutral) position and you have difficulty reaching the selected transfer case mode, with the engine running, shift the transmission momentarily to D (Drive) and then back to N (Neutral). This will realign the gear teeth in the transfer case and allow you to complete the shift.

    See also:

    Trailer Wiring Harness
    The vehicle is equipped with one of the following wiring harnesses for towing a trailer or hauling a slide-in camper. ...

    Hazard Warning Flashers
    Hazard Warning Flasher: Press this button located on the instrument panel below the audio system, to make the front and rear turn signal lamps flash on and off. This warns others that you are hav ...

    2009 GMC Canyon Review
    Remember the Chevrolet El Camino — the car that doubled as a truck? It's been gone from the U.S. market for more than 20 years, and GM's plan to produce its virtual successor in the Pontiac G8 s ...