See also:

Stop/Tail/Turn Signal/ Sidemarker Lamp
To replace one of these lamps: 1. Open the liftgate. See Liftgate on page 2‑9. 2. Remove the two screw covers from the taillamp assembly. 3. Remove the two screws securing the taillamp asse ...

Jump Starting
For more information about the vehicle battery, see Battery on page 10‑26. Jump starting can be used on vehicles with run&-down batteries by using jumper cables and another vehicle. WARN ...

Symbols
The navigation system may have a feature that allows for viewing parking assist symbols on the navigation screen while using the RVC. The Ultrasonic Rear Park Assist (URPA) system must not be disabled ...