Shifting out of Park
This vehicle is equipped with an electronic shift lock release system.
The shift lock release is designed to:
• Prevent ignition key removal unless the shift lever is in P (Park) with the shift lever button fully released.
• Prevent movement of the shift lever out of P (Park), unless the ignition is in ON/RUN or ACC/ ACCESSORY and the regular brake pedal is applied.
The shift lock release is always functional except in the case of an uncharged or low voltage (less than 9 volt) battery.
If the vehicle has an uncharged battery or a battery with low voltage, try charging or jump starting the battery. See Jump Starting on page 10‑92 for more information.
To shift out of P (Park) use the following:
1. Apply the brake pedal.
2. Move the shift lever to the desired position.
If you still are unable to shift out of P (Park):
1. Ease the pressure on the shift lever.
2. While holding down the brake pedal, press the shift lever all the way into P (Park).
3. Move the shift lever to the desired position.
If you are still having a problem shifting, then have the vehicle serviced soon.
See also:
Lane Departure Warning (LDW)
For vehicles with LDW, it is intended to help avoid unintentional lane departures.
It may provide a warning if the vehicle is crossing a lane without using a turn
signal. LDW uses a camera sensor ...
Turning the System On and Off
The URPA system can be turned on and off using the rear park aid disable button located next to the radio.
The indicator light comes on when the system is disabled and turns off when the system is ...
Adjusting the Speakers (Balance/Fade) (AM-FM Radio and AM-FM Radio with CD)
To adjust the balance or fade:
1. Press or press the
knob until the speaker control label displays.
2. To adjust the setting, do one of the following:
• Turn the knob.
• Press either SEEK ...