Torque Lock
If you are parking on a hill and you do not shift your transmission into P (Park) properly, the weight of the vehicle may put too much force on the parking pawl in the transmission. You may find it difficult to pull the shift lever out of P (Park).
This is called torque lock. To prevent torque lock, set the parking brake and then shift into P (Park) properly before you leave the driver seat. To find out how, Shifting Into Park on page 9‑33.
When you are ready to drive, move the shift lever out of P (Park) before you release the parking brake.
If torque lock does occur, you may need to have another vehicle push yours a little uphill to take some of the pressure from the parking pawl in the transmission, then you will be able to pull the shift lever out of P (Park).
See also:
Vehicle Reminder Messages
ICE POSSIBLE DRIVE WITH CARE
This message is displayed when ice conditions are possible.
TURN WIPER CONTROL TO INTERMITTENT FIRST
This message is displayed when attempting to adjust the intermitten ...
2010 GMC Terrain Review by Kelsey Mays
It should come as little surprise that the new GMC Terrain, a corporate twin
to the redesigned Chevrolet Equinox, retains most of its sibling's strengths and
weaknesses. The wild card — or, more ...
Total Weight on the Vehicle's Tires
Inflate the vehicle's tires to the upper limit for cold tires. These numbers
can be found on the Certification label or see Vehicle Load Limits on page 9‑16
for more information. Do not ...