Power Liftgate Operation
On vehicles with a power liftgate, the vehicle must be in P (Park) to use the power feature. The taillamps flash when the power liftgate moves.
Notice: If you open the liftgate without checking for overhead obstructions such as a garage door, you could damage the liftgate or the liftgate glass. Always check to make sure the area above and behind the liftgate is clear before opening it.
Choose the power liftgate mode by turning the dial on the switch to either the 3/4 or MAX position. Press8to open or close the liftgate.
See also:
Electronic Range Select (ERS) Mode
ERS or manual mode allows for the selection of the range of gear positions. Use
this mode when driving down hill or towing a trailer to limit the top gear and vehicle
speed.
To use this feature:
...
Blind Spot Mirrors
The blind spot mirror is a small convex mirror built into the upper and outer
corner of both outside mirrors. It can show objects that may be in the vehicle's
blind zone. ...
DVD Display Error Messages
The video screen may display one of the following error messages:
Disc Load/Eject Error or Mechanical Error: There are disc load or eject problems.
Disc Format Error or Unknown Format: The disc is i ...